Editing Aux Screen; Rotate Dial To 02/Eff; Rotate Dial To Ratio; Stored Memory Logs (Reports) - Kane KANE458S Manual

EDITING AUX SCREEN

You can customise lines 1 to 5 of the AUX screen. To edit a line, rotate
dial to AUX then press
Press and hold
The cursor flashes and the line number appears in the status bar. Use
or to select your option to appear on the line then press
If you have a wirelessly connected DTHA2 anemometer, it will
automatically display its readings on AUX when on. To stop this, simply
switch off the DTHA2.

ROTATE DIAL TO 02/EFF

ROTATE DIAL TO RATIO

STORED MEMORY LOGS (REPORTS)

Your analyser has a shared memory system which means your stored
logs are not limited by type.
18 KANE 458s MANUAL
or until EDIT appears on the status bar.
to select EDIT.
Oxygen reading
Combustion efficiency reading
T1 Flue Temperature reading
T2 Inlet Ambient Temperature reading
Nett Temperature reading
Status bar
CO/CO2 reading
Carbon Monoxide reading
Carbon Dioxide reading
Excess Air reading
Pressure reading
Status bar
to enter.