Kane Link; Measuring Flue Gasses - Kane KANE458S Manual

PRINTER TYPE
02 REF
LANGUAGE
CODE

KANE LINK

You can wirelessly connect optional KANE LINK devices to your
analyser. Once connected, they stay connected until you use KANE
LINK to remove them.
If on, they replace or add to you analyser measurements your analyser
makes.
See page 29 to add or remove optional KANE LINK devices

MEASURING FLUE GASSES

After countdown is finished and your analyser is ready to use, put its
flue probe into the appliance's sampling point. The probe tip should be
at the centre of the flue. Use the flue probe's depth stop cone to set in
position.
With balanced flues, make sure the probe is positioned far enough into
the flue so no air can "back flush" into the probe.
WARNING
Ensure the flue probe handle does not get hot!
16 KANE 458s MANUAL
IR PRINT
Use for "Normalised" readings -
02 REF
set to 3%, can adjust up or down
LANG Selects your required language
CODE authorised service agents only -
Select, KMIRP, IRP-2
Default
Password protected for
Default to 000000