Table of Contents
Advertisement
2.1.3 Switch Rear Panel
The rear panels of the Managed Switches indicate an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz.
Figure 2-1-3a
shows the rear panels of these Managed Switches
GS-4210-8UP2S/GS-4210-16UP4C & GS-4210-24UP4C Rear Panels
Figure 2-1-3a Rear Panels of GS-4210-8UP2S, GS-4210-16UP4C & GS-4210-24UP4C
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch's power supply automatically adjusts
to line power in the range of 100-240V AC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptacle on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electrical outlet and the power will be ready.
The device is a power-required device, which means it will not work till it is powered. If your networks
Power Notice:
should be active all the time, please consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
In some areas, installing a surge suppression device may also help to protect your Managed Switch
Power Notice:
from being damaged by unregulated surge or current to the Managed Switch.
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
38
Advertisement
Table of Contents
