Switch Rear Panel - Planet FSD-504HP User Manual

5. Switch Rear Panel

Figure 5-1 shows the rear panel of FSD-504HP.
Standard
The front panel of FSD-504HP provides one DIP switch
for "Standard" and "Extend" mode selections. The
detailed descriptions are shown in the following table.
DIP Switch
Mode
Standard
(default)
Extend
Extend
Figure 5-1: FSD-504HP Rear Panel
This mode makes the FSD-504HP operate
as a general switch and all ports operate
at 10/100Mbps auto-negotiation.
 This mode
operate as a VLAN isolation switch and
port 1 to port 4 will isolate respectively.,
Port 1 to port 4 can only communicate
with port 5 (uplink port).
 This mode also makes the FSD-504HP
operate
speed duplex mode only, but the delivery
distance of PoE power and network data
can reach 250m.
Function
makes
at auto–negotiation
- 6 -
51V DC
the FSD-504HP
10Mbps