Torque Settings For Screws - ADJ ENCORE LP12Z IP User Manual

T O R Q U E S E T T I N G S F O R S C R E W S
Following any maintenance or repair procedure that requires the opening of the fixture casing, the
casing must be re-installed using a torque driver and torqued to the specified settings below. The
re-assembled fixture should also be tested using an ADJ Hydro IP Tester in order to ensure that the
fixture's IP rating remains valid.
TORQUE DRIVERS (Recommended): UTICA TS-30 (Shown)
TORQUE DRIVER (Alternate):
• Proto J6107A
• Wiha 28887
ITEM NO. DESCRIPTION
1 Front Cover Screw
2 Back Cover Screw
1
QUANTITY TORQUE SPEC
8.7 + 0.4 lb-in
6
(10.0 + 0.5 kg-cm)
8.7 + 0.4 lb-in
6
(10.0 + 0.5 kg-cm)
36
2