ADJ ENCORE LP12Z IP User Manual page 16

A C C E S S O R Y I N S T A L L A T I O N
GEL FRAME AND BARN DOORS
5. Align the semi-circular slots on the front of the
barndoors with the two screw holes located on
the tabs of the gel frame holder, and loosely
re-install the included thumb screws. Twist the
barndoors to adjust their position, then tighten
the thumb screws to secure in place.
NOTE: WHEN FITTED
WITH THE BARN-
DOORS AND IN-
STALLED IN A SUS-
PENDED SETTING,
THE FIXTURE MUST
BE ORIENTED WITH
THE GEL FRAME
HOLDER LATCH
UPWARD. THIS
MINIMIZES THE RISK
OF THE BARNDOOR
FALLING IN THE
EVENT THAT THE
LATCH FAILS.
6. Flip the latch closed to secure the gel
frame and barndoors in place.
16