Dipswitch Settings - ADJ MB DMX II User Manual

Hide thumbs Also See for MB DMX II:

Table of Contents

D I P S W I T C H S E T T I N G S

The charts below details the Primary/Secondary setting for Primary/Secondary configuration. Use this

configuration when you will be using two or more fixtures in a Master/Slave configuration. Note: The

"Primary" settings should only be used once at the first motor, using the "Primary" setting more than

once in the chain may result in erratic operation.

SPEED (0.5)

SPEED (1 rpm)

SPEED (1.5 rpm)

SPEED (2 rpm)

SPEED (2.5 rpm)

SPEED (3 rpm)

SPEED (4 rpm)

SPEED (5 rpm)

•

Dipswitch 9 Control Rotation Direction

ON = CW Rotation / OFF = CCW Rotation

•

Dipswitch 10 Controls Primary/Secondary Operation:

ON = Primary / OFF = Secondary

Note: Dipswtich 10 must be in the off position for DMX operation

•

The optional MINI=C may be used during Primary/Secondary operation to stop motor rotation and

to blackout the electrical sockets.

DIP1

DIP2

DIP3

OFF

DIP4

DIP5

OFF

DIP6

DIP7

OFF

DIP8

OFF

Table of Contents