Table of Contents
Advertisement
W I R E L E S S S E T U P
To set up wireless control, follow the steps below:
1. Navigate to Personality > Wireless Settings in the system menu. Press ENTER to select this
menu.
2. Use UP and DOWN to scroll to "Wireless Settings" and press ENTER. Use UP and DOWN to
scroll to the "On" option, then press ENTER to confirm. A green LED and signal strength indicator
should illuminate to show that wireless is enabled and connected.
3. Return to the "Wireless Settings" sub-menu and scroll to "Set Wireless Channel." Press ENTER,
then use the UP and DOWN buttons to select the wireless channel that you would like this unit to
operate on. Selectable values are from 00 to 14. Press ENTER to confirm.
There are many factors that can affect and/or interrupt a wireless signal, including walls, glass, metal,
objects, and people. Therefore, the following guidelines are recommended in order to maximize the
chances of having a clear path for the wireless signal to reach the device:
•
Install the device a minimum of 9.8 ft (3m) above audiences and/or ground level.
•
Arrange the wireless antenna in an upright, vertical position.
•
Position devices in direct line of sight of the transmitting controller.
Careful planning and testing of the selected installation location is critical to ensure optimum and reli-
able wireless operation.
17
Advertisement
Table of Contents
