Remote Device Management (Rdm) - ADJ ENCORE LP12Z IP User Manual

Table of Contents

Advertisement

R E M O T E D E V I C E M A N A G E M E N T ( R D M )
NOTE: In order for RDM to work properly, RDM enabled equipment must be used throughout
the entire system, including DMX data splitters and wireless systems.
Remote Device Management (RDM) is a protocol that sits on top of the DMX512 data standard for
lighting, allowing the DMX systems of the fixtures to be modified and monitored remotely. This proto-
col is ideal for instances in which a unit is installed in a location that is not easily accessible.
With RDM, the DMX512 system becomes bi-directional, allowing a compatible RDM enabled con-
troller to send out a signal to devices on the wire, as well as allowing the fixture to respond (known as
a GET command). The controller can then use its SET command to modify settings that would typi-
cally have to be changed or viewed directly via the unit's display screen, including the DMX Address,
DMX Channel Mode, and Temperature Sensors.
FIXTURE RDM INFORMATION:
RDM Code
Device ID
0x1900
Please be aware that not all RDM devices support all RDM features, and therefore it is important
to check beforehand to ensure that the equipment that you are considering includes all of the fea-
tures that you require.
[0x1031] Preset Playback
[0x0122] Default Slot Value
[0x00C2] Boot Software Version Label
[0x00C1] Boot Software Version ID
[0x0070] Product Detail ID List
[0x0030] Status Messages
[0x0011] Proxied Device Count
[0x0200] Sensor Definition
[0x0201] Sensor Value
[0x0080] Device Model Description
[0x0081] Manufacturer Label
[0x0082] Device Label
[0x00E0] DMX Personality
[0x00E1] DMX Personality Description
Device Model ID
003C
60
Personality ID
6Ch (1); 9Ch (2); 10Ch (3); 12Ch (4); 15Ch (5);
18Ch (6)
[0x0400] Device Hours
[0x0015] Comms Status
[0x0031] Status ID Description
[0x0032] Clear Status ID
[0x0401] Lamp Hours
[0x0402] Lamp Strikes
[0x0403] Lamp State
[0x0404] Lamp Mode
[0x0405] Device Power Cycles
[0x0500] Display Invert
[0x0501] Display Level
[0x0603] Realtime Clock
[0x1010] Power State
[0x0020] Queued Message
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enc395

Table of Contents