ADJ ENCORE LP12Z IP User Manual page 11

I N S T A L L A T I O N
CLAMP MOUNTING
This fixture features two mounting holes for the attachment of an Omega bracket, which are located
on the adjustable mounting yoke. Insert the Omega bracket's twist lock fasteners into these two
mounting holes, then twist to secure in place. When mounting the fixture to a truss or any other sus-
pended structure, be sure to secure an appropriate rated clamp (not included) to the Omega bracket.
Insert a bolt of appropriate size through the bottom of the mounting clamp and the central hole on the
Omega bracket, and secure them together with a matching nut. Additionally, the unit also features a
safety cable loop on the rear panel (see the illustration below). Attach a separate SAFETY CABLE of
the appropriate weight rating to the provided safety cable loop, then secure the other end to a suitable
mounting point.
OMEGA
CLAMP MOUNTING
CLAMP
CLAMP
BOLT
CLAMP
NUT
SAFETY
CABLE
LOOP
MOUNTING
YOKE
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIX-
TURE IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE
WILL NOT FALL IF THE CLAMP FAILS.
11