Page 2
All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
DMX Modes System Menu Operating Instructions Multiple Unit Power Linking I Dimmer Curve Chart Dimensional Drawing I Trouble Shooting I Cleaning Limited Warranty (USA Only) Specifications ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 2...
Do not return this unit to your dealer without first contacting customer support. Introduction: The ADJ Encore Burst 100 IP is a DMX intelligent, high powered LED fixture. To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit.
Encore Burst 100 IP Warranty Registration The Encore Burst 100 IP carries a 2 year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number.
B. The appliance has been exposed to rain or water. C. The appliance does not appear to operate normally or exhibits a marked change in performance. ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 5...
Damages and/or performance issues resulting from installation in a marine and/or coastal environment will void the manufactures warranty and will NOT be subject to any warranty claims and/or repairs. ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 6...
(available at most electrical suppliers) to prevent water ingress/condensation and/or corrosion. The Encore Burst 100 IP is fully operational in three different mounting positions; hanging upside- down, mounted sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at least 12m (40ft) away from any flammable materials (decoration etc.).
Encore Burst 100 IP Overview CONTROL PANEL & LCD SCREEN (MODE/UP/DOWN/ENTER BUTTONS) 5-PIN DMX IN 5-PIN DMX OUT POWER IN POWER OUT SAFETY CABLE RIGGING POINT ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 8...
Data Cable (DMX Cable) Requirements (For DMX Operation): The Encore Burst 100 IP can be controlled via DMX-512 protocol. The Encore Burst 100 IP has 4 DMX channel modes. Your unit and your DMX controller requires a 5-pin XLR connector for data input and data output. We recommend Accu-Cable DMX cables.
In the case of the Encore Burst 100 IP, when in 6 channel mode you should set the starting DMX address of the first unit to 1, the second unit to 5 (4 + 1), the third unit to 9 (5 + 4), and so on. (See chart below for more details.)
*Current Maximum Temperature - Maximum xture temp. that has been recorded, before reset and after reset. **Maximum Temperature - Overall maximum xture temp. that has been recorded. (Not Resettable) ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 12...
Page 14
2. Use the UP or DOWN buttons to adjust the dimming frequency between 900hz, 1000hz, 1100hz, 1200hz, 1300hz, 1400hz, 1500hz, 6000hz, or 25000hz. 3. Once you have found your desired setting press ENTER to confirm. ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 13...
Page 15
3. Use the UP and DOWN buttons to “set” the pass code and press ENTER. 4. To reset the unit to the factory settings, press the UP or DOWN buttons until “Factory Restore” is displayed and press ENTER. ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 14...
4. Use the UP or DOWN buttons to set the pass code to “50” and press ENTER. The P-ON TIME-R will now be reset to “0” ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 15...
Page 17
4. The fixtures current temperature will now be displayed. Press the UP or DOWN buttons to switch between farenheit and celsius. Press the MENU button to exit. ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 16...
Page 18
1. Press the MENU button until “Information” is displayed, press ENTER. 2. Press the UP or DOWN buttons until “Software Version” is displayed and press ENTER. 3. The current software version will now be displayed. ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 17...
3. Always be sure to dry all parts completely before plugging the unit back in. Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi- due, dust, dew). ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 19...
ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual.
2 Year (730 days) Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 21...