Alignment Of The Machines - Brother GTXpro BULK DTF R2R Manual

ALIGNMENT OF THE MACHINES AND THE FILM
2.2
Check that the GTXpro Roll and the PowDR are still aligned (a laser is helpful).
The brakes of the castors should always be applied.
A
B
A: 23 cm parallel to the printer; B: 25-30 cm parallel to the printer
The film can run skewed through the system for various reasons, even if the machines are precisely
aligned. Missalignment of the film leads to poor print results.
The missalignment can be checked on different positions on the runway of the film.
C
E F G H H
D
5 / 26