Refilling Of White Ink - Brother GTX600 NB Instruction Manual


Close the lids. Pull out the IC-Stick and stick it
back on the refill container.

REFILLING OF WHITE INK

4.2
In general the chemical composition of white ink includes pigments and other substances which are
not soluble. This insolubility might lead to sedimentation in white ink and has to be eleminated before
the refill process starts.
If the white ink is not agitated well before refilling, the print result will not be acceptable and the refill
container as well as the white ink in the GTX600 NB will be lost.

A
Tools that help to shake the white ink properly:
A: Fitness vibrating plate
B: Vibrational shaker
C: Gyroscopic mixer

It is recommended to use a hydraulic scissor lift
and the enclosed faucet to refill the white ink.
B C
Press OK on the front panel to finish the ink

refilling.

Turn the container upside down and check it
with a flashlight. If there is only foam, but no
sedimentation left, you can start the refill
process.
12 / 27