3.3
EMC recommendations
The drive is compliant to the requirements of the following European directives, when installed as described in this User
Manual:
•
93/68/EEC CE Marking Directive
•
2014/30/EU Electromagnetic Compatibility (EMC) Directive
•
EN 61800-3:2012 Adjustable speed electrical power drive systems, Part3: EMC
•
product standard
The drive shall be installed as shown in the Figure below, in order to meet the above EMC requirements:
* if +Vmot to capacitor wire length ≥ 2m, use twisted wires for the supply and ground return (Vmot and GND)
* if +Vmot to capacitor wire length ≥ 20m, the capacitor value must be ≥ 2200 µF.
Technosoft 2022
Figure 3.3 EMC recommended connections
13
iPOS360x BX-CAN Technical Reference