Sound-Controlled; Static Colors; Settings; Led Mode - SHOWTEC LED Octostrip Set MKII 100 cm Manual

LED Octostrip Set MKII 100 cm

6. Sound-controlled

With this menu you can set sound-controlled mode.
01) Press the MODE button until the display shows
02) Press the UP/DOWN buttons to set the sound sensitivity. The adjustment range is between
03) Press the SETUP button to confirm.
04) The device will now react to the beat of the background music.

7. Static Colors

With this menu you can set the device's static colors.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the menu.
03) Repeatedly press the SETUP button to toggle through the 3 colors: Red, Green and Blue.
04) Once you have chosen the desired color, press the UP/DOWN buttons to set color brightness. The
adjustment range for each color is between 0-255, from dark to brightest.
05) You can combine Red, Green and Blue (0-255) to create an infinite range of colors.

8. Settings

With this menu you can adjust the device's settings.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 4 options below.

8.1. LED Mode

With this menu you can set the desired LED strip length: 50 cm or 100 cm.
01) When the display shows
02) Press the UP/DOWN buttons to choose between 1.0M and 0.5M.
03) Press the SETUP button to confirm.

8.2. DMX Error Menu

With this menu you can determine the device's behavior in case of a DMX signal error.
01) When the display shows
02) Press the UP/DOWN buttons to choose between OFF and HOLD.
03) If you have chosen OFF, the device will black out, when a DMX signal error occurs.
04) If you have chosen HOLD, the device will fall back on the last properly working DMX signal from
before the DMX signal error, which ensures undisrupted performance.
05) Press the SETUP button to confirm.

8.3. Display Settings

01) When the display shows
02) Press the UP/DOWN buttons to choose one of the following options: 10s, 20s, 30s, 60s (the display will
turn off when no button is pressed within the preset amount of time) or ON (the display will remain
continuously on).

8.4. Reset

With this menu you can restore the factory settings.
01) When the display shows
02) Press the UP/DOWN buttons to choose between YES and NO.
03) If you have chosen YES, press the SETUP button to confirm. The device will now restore the default
settings and will return to the main menu.
Ordercode: 42232
, from OFF to high sound sensitivity.
, press the SETUP button to open the menu.
, press the SETUP button to open the menu.
, press the SETUP button to open the menu.
, press the SETUP button to open the menu.
21
.
.
.