Control Modes; One Energetic (Built-In Programs, Static Color, Manual); One Energetic (Sound-Controlled) - SHOWTEC Energetic V3 Manual

Energetic
Exclusion of liability
Be aware that in some countries, there are additional regulations, regarding the use of laser devices.
Therefore, we strongly advise you to verify your national laws with your authorities: We do not take any
responsibility for eventual discrepancies, changes or adaptions regarding lawful use of laser devices.

Control Modes

There are 6 modes:

One Energetic (Built-in programs, Static Color, Manual)

01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Energetic is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 18 and 19 for more information about Built-in programs, Static Color and Manual
modes.

One Energetic (Sound-controlled)

01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Turn on the music. If the device is set to sound-control, then the Energetic will react to the beat of
the music. Please see page 18 for more information about the sound-control options.
Ordercode: 43165
● Built-in programs
● Static Color
● Manual
● Sound-controlled
● Master/slave
● DMX-512 (2CH, 9CH)
12
Fig. 05