Net Mask; Net; Subnet; Universe - SHOWTEC LED Octostrip Set MKII 100 cm Manual

LED Octostrip Set MKII 100 cm
03) Repeatedly press the SETUP button to skip to the desired section of the IP address (the currently
selected section will blink).
04) Press the UP/DOWN buttons to set the values.
05) Press the SETUP button to confirm.
06) Keep pressing the SETUP button until the display returns to the previous menu.

5.3. Net Mask

With this menu you can set the net mask.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu. The display will show
03) Repeatedly press the SETUP button to skip to the desired section of the net mask (the currently
selected section will blink).
04) Press the UP/DOWN buttons to set the values.
05) Press the SETUP button to confirm.
06) Keep pressing the SETUP button until the display returns to the previous menu.

5.4. Net

With this menu you can set the net.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the net value. The adjustment range is between
04) Press the SETUP button to confirm.

5.5. Subnet

With this menu you can set the subnet.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the subnet value. The adjustment range is between
04) Press the SETUP button to confirm.

5.6. Universe

With this menu you can set the universe.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to set the universe value. The adjustment range is between
04) Press the SETUP button to confirm.

5.7. MAC Address

With this menu you can set the MAC address.
01) Press the UP/DOWN buttons until the display shows
02) Press the SETUP button to open the menu.
03) Press the UP/DOWN buttons to insert the password and to gain access to the menu.
The password is 088.
04) Press the SETUP button to confirm the password and enter the menu. The display will show
05) Repeatedly press the SETUP button to skip to the desired section of the MAC address (the currently
selected section will blink).
07) Press the UP/DOWN buttons to set the values.
08) Press the SETUP button to confirm.
09) Keep pressing the SETUP button until the display returns to the previous menu.
Ordercode: 42232
.
.
.
20
.
.
.
.
.
.
.