Operating Determinations; Rigging - SHOWTEC LED Octostrip Set MKII 100 cm Manual

Table of Contents

Advertisement

LED Octostrip Set MKII 100 cm

Operating Determinations

This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
The maximum ambient temperature t
The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself!
Always let the installation be carried out by an authorized dealer!
Improper installation can cause serious injuries and/or damage of property!
The LED Octostrip Set MKII 100 cm can be placed on a flat stage floor or be mounted to any kind of truss,
with a clamp and the included quick locks.
Ordercode: 42232
= 40°C must never be exceeded.
a
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

42232

Table of Contents