Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SHOWTEC LED Tube Basic Square
Summary of Contents for SHOWTEC LED Tube Basic Square
- Page 1 LED Tube Basic Square ORDERCODE 41014...
- Page 2 For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
-
Page 3: Table Of Contents
Showtec Showtec LED Tube Basic Controller Product Guide ™ Warning..…...................…………………………………….………….…….. Unpacking Instructions………………………………………………………………………………………………..… Contact Us…………………………………………………………………………………………………………….….. Safety-instructions……………………………………………………………………………………………………….. Operating Determinations…………………………………………………………………………………………….. Rigging………………………………………………………………………………………………………………….…. Description..…................……….……………………………………………… Features…….……………………………………………………………………………………….……...……………… Overview…………………………………………………………………………………………………………………... Backside…………………………………………………………………………………………………………………... 41010 LED Tube Basic.…..........…...…………………………………….………..…………….. SPYA0058 LED PSU.…..........…...……………………………….………..……………………… Installation................…...…………………………………….….……………. Set Up and Operation..............……..…………………………….………………. Stand-alone………..………………………………………………………………………..….………….…………..… Set up options Controller………………………………………………………………………………………………. DMX-controlled………………………………………………………………………..….………….………………….. -
Page 4: Warning
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. -
Page 5: Safety-Instructions
SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Keep this device away from rain and moisture! For indoor use only! CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires! Before your initial start-up, please make sure that there is no damage caused by transportation. -
Page 6: Operating Determinations
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service. For replacement use fuses of same type and rating only. -
Page 7: Description
Description of the device Features The LED Tube Basic Controller is designed for the more demanding user: • 5 DMX Channels • Controllable DMX or Stand-alone controller. • 4000 Tubes can be controlled • 38 programs • DMX IN and DMX OUT. Overview Fig. -
Page 8: 41010 Led Tube Basic
41014 LED TUBE BASIC Fig. 3 1) Signal Input: Low voltage Signal Input must be connected to the Signal Output (6) of the previous tube or with the Signal Output cable from the LED Tube Basic controller. 2) Ground: Be sure to ground the LED tube properly. 3) Mains Input Cable: This cable must be connected to the Mains Output (5) of the previous tube or to any mains wall socket 4) Aluminum Tube Holder: To install the tube on a surface. -
Page 9: Installation
Installation Remove all packing materials from the LED Tube Basic Controller and the LED Tube. Check that all foam and plastic padding is removed. Connect all cables. Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. Before plugging the unit in, always make sure that the power supply matches the product specification voltage. -
Page 10: Stand-Alone
Stand-alone Press MODE button to enter mode setting. You can select 43 options. You will find all the pre-programmed scenes below. Menu From Program 1 – 38 you can push the SET UP button and select: • Tube Quantity: 0 – 4000 Tubes •... -
Page 11: Dmx-Controlled
DMX Controlled 1. Turn the power switch on. Press MODE button and select DMX Mode. 2. Then press the Set Up-button; the display shows the current DMX starting address. 3. For DMX Controlled you have to use DMX Channel: 1-255. 4. -
Page 12: Set Up Example
Channel 5 – RGB Mode For RGB Mode the Channel 5 Fader has to be set to 255 (100%) to be active. Otherwise there will be no RGB Mode. When you activate RGB Mode, the Channels are: Channel 2: Red Channel 3: Green Channel 4: Blue When you want to stop the RGB mode, be sure to deactivate Channel 5. -
Page 13: Maintenance
2. Check power from the wall, all cables, the fuse, etc. 3. If all of the above appears to be O.K., plug the unit in again. 4. If nothing happens after 30 seconds, unplug the device. 5. Return the device to your Showtec dealer. -
Page 14: Product Specifications
Voltage : AC 230V-50Hz (CE) Input Voltage: 9-12V / 500mA external adapter Dimensions :180 x 125 x 49 mm (LxWxH) Weight : 0,4 kg Model: Showtec LED Tube Basic Square (41014) Voltage : AC 230V-50Hz (CE) Power: 12W IP Protection: IP33...
Need help?
Do you have a question about the LED Tube Basic Square and is the answer not in the manual?
Questions and answers