LED Octostrip Set MKII 100 cm
Description of the device
Features
The LED Octostrip MKII 100 cm is a complete plug-and-play set; consisting of 8 LED strips, a controller and
eight 5-meter long XLR extension cables. The new LED Octostrip can control each strip's 8 individual RGB
sections, along with the corresponding dimmer and strobe settings. The device supports ArtNet protocol,
which facilitates the use of device while operating in the full RGB mode (192CH mode). The updated
color presets and many versatile built-in color flows, in horizontal and vertical directions, are accessible
via DMX (in 6CH, 8CH, 14CH, 24CH, 26CH and 50CH channel modes).
It is possible to connect the Octostrip MKI to the new Octostrip MKII 100 cm.
However, in such case, it is not advisable to operate the old and the new version of the
device in Auto mode, as the built-in programs differ per version.
●
Power supply: 100-240V AC, 50/60Hz
●
Power consumption: 52W (full output)
●
Control protocol: DMX-512, ArtNet
●
Built-in programs: 21 programs
●
DMX channels: 6, 8, 14, 24, 26, 50, 96, 112, 192, 208 channels
●
Maximum cable length: 5 m
●
Connectors: Pro power connector, 3-pin XLR IN/OUT, 5-pin XLR LED strip OUT, ArtNet RJ45 IN/OUT
●
Control modes: Auto, Built-in programs, Sound-controlled, Static Colors, Master/Slave, DMX/ArtNet
●
Cooling: Convection
●
Dimmer: 0-100%
●
Strobe: 0-20Hz
●
Housing: Die-cast aluminum
●
Color: Black
●
IP rating: IP20
●
Fuse: T2L/250V
●
Dimensions (controller): 200 x 315 x 92 mm (LxWxH)
●
Dimensions (LED strip): 1025 x 30 x 50 mm (LxWxH)
●
Weight (controller): 2,5 kg
●
Weight (8 x LED strips): 8 x 1,4 kg
Note: It is possible to purchase a separate LED Octostrip controller, to create more flexibility.
Optional accessories:
42233
– Showtec Controller for Octostrip MKII
Overview
Ordercode: 42232
7
Fig. 01