Rear Panel; Led Indicators - D-Link DGS-2000 Series Reference Manual

1 Product Introduction

Rear Panel

Power: Connect the supplied AC power cable to this port

LED Indicators

The Switch supports LED indicators for Power, Fan, and Link/Act for each port. The following shows the LED
indicators for the DGS-2000 series Ethernet Switch along with an explanation of each indicator.
Location
Per Device
LED Per
10/100/1000Mbps
Copper Port
Figure 1.20 – DGS-2000-52MP Rear Panel
Figure 1.21 –LED Indicators on DGS-2000 series
LED Indicative Color
Power Green
Fan Error
Red
PoE Max. Amber
Link/Act Green/Amber
D-Link DGS-2000 Series Ethernet Switch User Manual
Status Description
Solid Light Power on
Light off Power off
The fan has runtime failure and is
Solid light
brought offline.
The PoE Max LED lights up when
the total PoE output of Switch
reached or exceeded:
DGS-2000-10P: 65 Watts
DGS-2000-10MP: 130 Watts
Solid light
DGS-2000-28P: 193 Watts
DGS-2000-28MP and DGS-2000-
52MP: 370 Watts
In the meantime, no additional PoE
device can be supported.
Total PoE output of Switch reached
Blinking
guard band mode. (Max. PoE
Amber
budget < 7 Watts )
When the system power usage
Light off does not reach the guard band
range.
When there is a secure 1000Mbps
Solid
Ethernet connection (or link) at any
Green
of the ports.
When there is reception or
Blinking transmission (i.e. Activity—Act) of
Green data occurring at a 1000Mbps
Ethernet connected port.
When there is a secure
Solid
10/100Mbps Ethernet connection
Amber
(or link) at any of the ports.
When there is reception or
Blinking transmission (i.e. Activity—Act) of
Amber data occurring at a 10/100Mbps
Ethernet connected port.
1 1 4 4