Table of Contents
Advertisement
4 Web-based Switch Configuration
ACL > Access Profile List
The Access Profile List provides information for configuring ACL Profiles manually. ACL profiles are attached
to interfaces, and define how packets are forwarded if they match the ACL criteria.
The contents of Access Profile List table include:
Profile ID: Indicates the profile Identification number. The possible configured profile IDs are 1~50, and
profile ID 51~55 are reserved for the pre-defined features.
Owner Type: The owner type of ACL profile; it can be normal ACL, Voice VLAN or Surveillance VLAN.
Profile Summary: Displays the profile summary.
Show Details: To display an ACL's profile details. The ACL profile details are displayed below the ACL table.
Show Rules: To show the access rule in this profile.
To add a new rule, please see Access Rule List in the next section.
Delete: To delete an access profile.
To manually add a profile, click Add ACL Profile:
The steps of adding an access profile is like below:
1) After selecting the Profile ID and Frame Type (MAC, IPv4, IPv6 or Packet content ACL), specify
attributes
like
Untagged/Tagged
ICMPv6/TCP/UDP (for IPv6), then click Select and a simplified frame diagram will be displayed.
2) Select the field of interest and related columns will be displayed in lower part of the page. Enter the
filtering mask and click Create when done. A filtering mask is to specify the digit that user wants to check.
For example, if user wants to check a network of 192.168.1.0/24, then it should enter the IP mask as
255.255.255.0.
failed.
Figure 4.169 - ACL > Access Profile List
Figure 4.170 - Add ACL Profile
(for
MAC),
ICMP/IGMP/TCP/UDP/Protocol
1
1
1
1
3
3
D-Link DGS-2000 Series Ethernet Switch User Manual
ID
(for
IPv4),
or
Advertisement
Table of Contents
