Application Page Definitions - Grandstream Networks WP820 Administration Manual

Here below list of supported dynamic variables:
$phone_ip
$mac
$product
$program_version
$hardware_version
$language
$local
$display_local
$remote
$display_remote
$active_user

Application Page Definitions

Contacts
New contact
Sort Phonebook by
Delete
Add to blacklist
Delete
New Group
Table 33 : Event Notification
Allows users to add a new contact by filling the corresponding contact's information and setting the
appropriate account then clicking on OK. Users can modify the contact later by pressing on the Edit icon
under Operation section.
Sets which part of name, first name or last name, will be sorted in alphabetical order to display.
The default setting is "Last Name".
Select the Contacts you want to be deleted and press on Delete.
Selects the contacts you want to be Blacklisted and press on Add to blacklist. The blacklisted contact's
calls/messages will be blocked.
Select the group you want to be deleted and press on Delete.
Click on New Group and fill the Group name, then select the contacts names you want to be added to this
group and press on OK. A new group will be created in the phonebook.
The IP address of the phone.
The MAC address of the phone.
The product name of the phone.
The software version of the phone.
The hardware version of the phone.
The display language of the phone.
The called number on the phone.
The display name of the called number on the phone.
The call number on the remote phone.
The display name of the call number on the remote phone.
The account number during a call on the phone.
Contacts
Group
Blacklist