Application Page Definitions - Grandstream Networks WP820 Administration Manual

Unhold
Log On
Log Off
Register
Unregister
SAFE/Panic Call
Here below list of supported dynamic variables:
$phone_ip
$mac
$product
$program_version
$hardware_version
$language
$local
$display_local
$remote
$display_remote
$active_user

Application Page Definitions

Contacts
New contact
Table 33 : Event Notification
Allows users to add a new contact by filling the corresponding contact's information and setting
the appropriate account then clicking on OK. Users can modify the contact later by pressing on the
Edit icon under Operation section.
Configures the event URL when users resume a call on the
phone.
Configures the event URL when users log on the phone
successfully.
Configures the event URL when users log off the phone.
Configures the event URL when an account in the phone is
registered successfully.
Configures the event URL when an account in the phone is
unregistered.
Configures the event URL when panic call is made.
The IP address of the phone.
The MAC address of the phone.
The product name of the phone.
The software version of the phone.
The hardware version of the phone.
The display language of the phone.
The called number on the phone.
The display name of the called number on the phone.
The call number on the remote phone.
The display name of the call number on the remote phone.
The account number during a call on the phone.
Contacts