Reverse Warning Buzzer Limit Switch (If Equipped); Testing The Reverse Warning Buzzer Limit Switch; Reverse Warning Buzzer Limit Switch Removal; Reverse Warning Buzzer Limit Switch Installation - Club Car Carryall 295 2013 Maintenance And Service Manual

ELECTRICAL COMPONENTS: GASOLINE
VEHICLES
2. Connect the black wire from the wire harness to the negative (–) terminal on the buzzer.
3. Connect the red/white wire from the wire harness to the positive (+) terminal on the buzzer.
4. Lower and secure the hood.
5. Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline/Diesel Vehicles, Section
1, Page 1-4.

REVERSE WARNING BUZZER LIMIT SWITCH (IF EQUIPPED)

See General Warnings, Section 1, Page 1-2.

TESTING THE REVERSE WARNING BUZZER LIMIT SWITCH

See Test Procedure 25 – Reverse Warning Buzzer Limit Switch (If Equipped) on page 11-28.

REVERSE WARNING BUZZER LIMIT SWITCH REMOVAL

1. Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2. Raise the hood.
3. Disconnect the wires from the reverse warning buzzer limit switch (Figure 13-7, Page 13-12).
4. Remove the screws, nuts, washers, and lockwashers that secure the limit switch.
5. Remove the limit switch.
2141
Figure 13-8 Reverse Warning Buzzer Limit Switch
Adjustment Slot

REVERSE WARNING BUZZER LIMIT SWITCH INSTALLATION

1. Install the reverse warning buzzer limit switch in the reverse order of removal.
2. Place the Forward/Reverse handle in the REVERSE position.
All manuals and user guides at all-guides.com
Reverse Warning Buzzer Limit Switch (If Equipped)
2013 Carryall 295/XRT 1550 Maintenance and Service Manual
2142
Figure 13-9 Reverse Warning Buzzer Limit Switch
(Properly Adjusted)
13
Page 13-13