Angle Frame Bushings; Snow Blade Angle Frame - Club Car Carryall 295 2013 Maintenance And Service Manual

HYDRAULIC ATTACHMENT SYSTEM
1
2291
Figure 19-75 Remove Bushings from Rod End

ANGLE FRAME BUSHINGS

SNOW BLADE ANGLE FRAME

Removal and Installation
WARNING
• Wear safety glasses to prevent eye injury when any of the following conditions exist:
– Fluids are under pressure.
– Flying debris or loose material is present.
– Engine is running.
– Tools are being used.
1. Remove bushings (1) (Figure 19-77, Page 19-38) from both sides of angle frame.
2. Apply LOCTITE 271 (Red) to the bushings before installing them into the frame.
3. Install bushings (2) (Figure 19-78, Page 19-38) on both sides of the angle frame.
All manuals and user guides at all-guides.com
2013 Carryall 295/XRT 1550 Maintenance and Service Manual
2292
Figure 19-76 Apply LOCTITE and Install Bushings Into
Rod End
Angle Frame Bushings
Page 19-37
19