USING THE PROJECTOR
Display menu
Learn how to configure the settings to properly project images according to your installation circumstances.
Submenus
Aspect Ratio
Digital Zoom
Geometric Correction
Edge Mask
Freeze Screen
Test Pattern
PIP/PBP
Aspect Ratio
Set the aspect ratio of the projected image. The available options are Auto, 4:3, 16:9, 16:10, LBX, or Native. Select
Auto to display the detected image size.
Digital Zoom
Digitally adjust the size of the projected image.
Note:
Image projection on the screen depends on the signal source..
Proportional
Enable the function to have the image's height and width changed at the same ratio.
Horizontal
Use the t and u buttons to change the width of the projected image.
Vertical
Use the p and q buttons to change the height of the projected image.
Horizontal Shift
Use the t and u buttons to horizontally shift the image.
Vertical Shift
Use the p and q buttons to vertically shift the image.
Reset
Reset digital zoom settings to factory default values.
54
English