Pip/Pbp - Optoma ZU1100 User Manual

USING THE PROJECTOR

PIP/PBP

PIP/PBP (picture in picture/picture by picture) allows simultaneously displaying two images from two input sources.
Screen
Select the appropriate PIP/PBP mode or disable the function.
‡ Off: Disable PIP/PBP mode.
‡ PIP: Display one input source on the main screen and the other input source in an inset window.
‡ PBP: Display two images of the same size on the screen.
Main Source
Select an input source for the main image. The available input sources are HDMI1, HDMI2, DVI-D, 3G-SDI,
and HDBaseT.
Sub Source
Select an input source for the second image. The available input sources are HDMI1, HDMI2, DVI-D, 3G-SDI,
and HDBaseT.
Swap
Swap the main source and sub source.
Size
Change the display size of the sub source in PIP mode.
Location
Adjust the location of the sub image. In the layout chart below, the "P" indicates the main image:
‡ PBP Layout
‡ PIP Layout
PIP, Bottom Right
PIP, Bottom Left
58 English
PBP, Main Left
P
PBP, Main Top
P
PIP Layout
Small
PIP, Top Left
PBP Layout
PBP, Main Right
PBP, Main Bottom
PIP Size
Medium
P P
P P
P P
P
P
Large
P
P
P