Table of Contents
Advertisement
SETUP AND INSTALLATION
RS232 Pin assignments
Adjusting the projector image
Image height
The projector is equipped with adjustable feet to change the image height.
1.
Locate the adjustable foot you wish to adjust on the underside of the projector.
2.
Rotate the adjustable foot clockwise or counterclockwise to raise or lower the projector.
Note:
The adjustable feet can be raised up to 38mm, or may be removed for certain installations. Please
ensure sufficient space around projector for proper air flow.
Zoom and Focus
Use the remote control or projector keypad to adjust the zoom and focus of the projected image.
‡
To adjust the image focus, press Focus and the pq buttons to improve the image quality.
‡
To adjust the image size, press Zoom and the
26
English
9
8
7
6
5
4
3
2
1
Pin No.
Signal
1
N/A
2
RXD
3
TXD
4
N/A
5
GND
buttons to get the required image size.
A
B
Pin No.
Signal
6
N/A
7
N/A
8
N/A
9
N/A
A
B
Advertisement
Table of Contents
