Specifications - Optoma ZU1100 User Manual

Table of Contents

Advertisement

ADDITIONAL INFORMATION

Specifications

Optical
Resolution
Lens
Image size (diagonal)
Projection distance
Electrical
Inputs
Outputs
Control port
Power requirement
Mechanical
Installation orientation
Dimensions
Environmental conditions
Note:
All specifications are subject to change without notice.
WUXGA (1920 x 1200)
Power Zoom/Focus and full lens shift
50"~500"
Please refer to "Throw Distance" spec. in "Image size and projection distance" on
page 91.
2 x HDMI In (version 2.0) (with locking screw)
1 x DVI-D
1 x HDBaseT
1 x 3G-SDI In
1 x 3D SYNC In
1 x HDMI Out (version 2.0) (with locking screw)
1 x 3D SYNC Out
1 x RS232 (D-sub 9 pin) (PC Control)
1 x Wired in (3.5mm phone jack) (Remote In)
1 x 12V Trigger (3.5mm phone jack / Black)
1 x USB type A (5V/0.5A)
1 x RJ-45 (LAN)
2 x IR Receiver (Front / Top)
100-240V~ 50/60 Hz, 8.5A
360° rotation, no restrictions
484 (W) x 529 (D) x 207.8 (H) mm (w/o lens, with feet)
484 (W) x 529 (D) x 195 (H) mm (w/o lens, w/o feet)
Operating: 0°C ~ 40°C*(32~104°F); 10~85%RH, non-condensing
Storage: -10°C ~ 60°C(14~140°F); 5~90%RH, non-condensing
Note:
If High Altitude >5000 ft, the system will be operated at the range of 0~35°C
to ensure the normal operation of the projector. The light power will be
reduced due to the high ambient temperature (≥35°C).
Description
Description
Description
99
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zu1300

Table of Contents