Table of Contents
Advertisement
‡
This projector has a built-in Class 4 laser module. Never attempt to disassemble or modify the laser module.
‡
Any operation or adjustment not specifically instructed in the User manual creates the risk of hazardous laser
radiation exposure.
‡
Do not stare into beam when the projector is on. When turning on the projector, make sure no one within
projection range is looking into the lens.
‡
Follow the control, adjustment, or operation procedures to avoid damage or injury from exposure to laser radiation.
‡
The instructions for the assembly, operation, and maintenance include clear warnings to avoid possible exposure
to hazardous laser radiation.
‡
We recommend you install this projector above the reach of children.
‡
Notice is given to supervise children and to never allow them to stare into the projector beam at any distance
from the projector.
‡
Notice is given to use caution when using the remote control for starting the projector while in front of the
projection lens.
‡
Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the beam.
Product safety labels
Light beam related safety labels
Label image
Optoma Technology Inc.
47697 Westinghouse Drive, Fremont, CA 94539, USA
This product complies with performance standards for laser
products under 21 CFR Part 1040 except with respect to those
characteristics authorized by Variance Number XXXX-X-XXXX
effective [insert the date of the variance approval]
IEC/EN 60825-1:2014 CLASS 1 LASER PRODUCT RISK GROUP 2
Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk
Group 2 LIP as defined in IEC 62471-5:Ed. 1.0. For more information see Laser
Notice No. 57, dated May 8, 2019.
IEC/EN 60825-1:2014 PRODUIT LASER DE CLASSE 1 GROUPE DE RISQUE 2
Conforme aux normes 21 CFR 1040.10 et 1040.11, à l'exception de la conformité
en tant que LIP du groupe de risque 2 définie dans la CEI 62471-5: Ed. 1,0. Pour
plus d'informations, voir l'avis au laser n ° 57 du 8 mai 2019.
IEC/EN 60825-1:2014
1
RG2
E I
C
6
2
4
7
1
-
5
E :
d
1 .
0 .
R
G
2
L
P I
1
0
4
0
1 .
1
2
0
1
9
5
IEC/EN 60825-1:2014 1
RG2
E I
C
6
2
4
7
1
-
5
E :
d
1 .
0 .
R
G
2
L
P I
1
0
4
0
1 .
1
2
0
1
9
5
Label description
"WARNING: MOUNT ABOVE THE REACH AND SIGHT OF CHILDREN."
The use of a ceiling mount is recommended with this product to place
it above the eye level of children.
Additional warning against eye exposure for close exposures less
than 1 m.
FDA laser variance (US projectors only)
U.S.A. Only
This product is classified as Class 1 Laser Product-Risk Group 2 of IEC
60825-1:2014 and also complies with 21 CFR 1040.10 and 1040.11
as a Risk Group 2, LIP (Laser Illuminated Projector) as defined in IEC
62471-5:Ed.1.0. For more information, see Laser Notice No. 57, dated
May 8, 2019.
2
1
C
F
R
1
0
4
0
1 .
0
8
5
7
2
1
C
F
R
1
0
4
0
1 .
0
8
5
7
This projector may become Risk Group 3 product when an interchangeable
lens with throw ratio greater than 2.92 is installed. Refer to the manual
for the lens list and hazard distance before operation. Such combinations
of projector and lens are intended for professional use only, and are not
intended for consumer use.
Not for household use.
No direct exposure to beam shall be permitted, which can cause injury
to the retina in the back of the eye.
As with any bright light source, do not stare into the beam, RG2 IEC
62471-5:2015
7
English
Advertisement
Table of Contents
