Active Image Setup; Schedule - Optoma ZU1100 User Manual

USING THE PROJECTOR

Active Image Setup

Automatically adjust the image to achieve better performance.
‡ Active Focus: Automatically adjust the image focus.
Note:
‡
Before adjusting the Active Focus, make sure the boresight has been adjusted to the best
position.
‡ When the remote control performs focus adjustment, pressing the Enter key can also trigger the
Active Focus function.
Active Color Uniformity: Automatically adjust the RGB gain of projection image to approximate
‡
the color of target area for a uniform color display. The brightness of the original content may be
decreased.
±
±
±
Note:
‡ The Active Image Setup functions are performed via the external optional camera. Please make
sure the camera is not covered or blocked by any objects. The auto adjustment process might take
more than one minute to complete. The accessories may vary depending on model, specification
and region.
‡
The functions in the Active Image Setup menu are available for the projections from 100" to 300"
and imaging range needs to cover the entire projection screen. It is recommended to use the
Optoma Visual Suite software for seamless setups and calibration.

Schedule

Schedule the projector functions to operate automatically at the set time.
Date and Time
Before setting a schedule, setup the date and time settings. Refer to "Date and Time" on page 66.
Schedule Mode
Enable or disable the schedule function. If the projector is controlled via external devices or software, the
Schedule Mode displays AP Mode, and the projector's schedule functions are grayed out.
64 English
Calibration: Perform the calibration process. If the RGB gain adjustment of projection area is
too much difference, the color will not be projected correctly.
Target Selection: Select the target area for calibration. The default area is the center of the
content. Press Enter to return to the OSD menu after the selection is completed.
Reset: Clear the calibration result.
Schedule
Date and Time
Schedule Mode
View Today
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Reset Schedule
Enter
2019/11/06 14:00
On
Monday
On
Enter Select Return
Exit