Table of Contents
Advertisement
USING THE PROJECTOR
Powering on / off the projector
Powering on
1.
Securely connect the AC power cord and signal/source cable to the projector.
2.
Set the power switch to the "I" (ON) position and wait until the power button "
keypad is solid orange.
3.
Turn on the projector by pressing the ON button "
the projector keypad.
The status LED is orange with a long blink and the status LED will turn to solid green.
Note:
If the projector is turned on for the first time, you will be prompted to select the projector language, projection
orientation, and other settings.
30
English
" on the remote control or the power button "
or
" on the projector
" on
Advertisement
Table of Contents
