Menu Navigation And Features - Optoma ZU1100 User Manual

USING THE PROJECTOR

Menu navigation and features

The projector has multilingual on-screen display (OSD) menus that allow you to make image adjustments and
change a variety of settings.
1. To open the OSD menu, press the Menu key on the remote control or projector keypad.
2. To select a main menu or submenu, use the p and q buttons to highlight it. Then, press the Enter
key to enter the submenu.
Press the Exit key to return to the previous menu or exit the OSD menu if at top level.
3.
4. Setting methods to adjust the function value or selection an option.
‡
‡
‡
‡
Main menus
1
2
3
4
5
6
No
1.
2.
3.
32 English
To adjust the slide bar values, highlight the function, and use the t u buttons to change value.
To check or uncheck a checkbox, highlight the function, and press Enter.
To input a number or symbol, highlight the number or symbol, and use the p and q buttons to
make a selection. You can also use the number keys on the remote control or keypad.
To select a function option, use the p q t u buttons to make the selection. If no Enter icon
shows at the navigation bar, the highlighted option is automatically applied. If there is an Enter
icon at the navigation bar, press Enter to confirm your selection.
Submenus
Picture Mode
Dynamic Range
Brightness
Contrast
Sharpness
Gamma
Dynamic Contrast
Color Settings
Wall Color
3D Setup
Select
Item
Image menu
Display menu
Input settings menu
Image
Exit
Navigation guide
No Item
4. Device setup menu
5. Communication menu
6. Information menu
Settings
Bright
Off
Enter