Table of Contents
Advertisement
‡
Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
‡
Do not setup the projector in places where it might be subjected to vibration or shock.
‡
Do not touch the lens with bare hands.
‡
Do not clean the lens when the projector is turned on. Any damage resulting from doing so will void the
warranty.
‡
Remove battery/batteries from remote control before storage. If the battery/batteries are left in the
remote for long periods, they may leak.
‡
Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it
can adversely affect the quality of the projector performance.
‡
Please follow the correct projector orientation installation as non standard installation may affect the
projector performance.
‡
Use a power strip and/or surge protector. As power outages and brown-outs can KILL devices.
‡
Warning: Do not remove the earthing pin on the mains plugs. This apparatus is equipped with a three
prong earthing type mains plug. This plug will only fit an earthing-type mains socket. This is a safety
feature. If you are unable to insert the plug into the mains socket, contact an electrician.
‡
Caution: This equipment is equipped with a three-pin grounding-type power plug. Do not remove the
grounding pin on the power plug. This plug will only fit a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact an electrician.
Light Intensity Hazard Distance
This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 of IEC 60825-1 : 2014 and also complies
with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed. 1.0.
For more information, see Laser Notice No. 57, dated May 8, 2019.
When set up with BX-CTA13 lens (throw ratio greater than 2.92), this projector may become Class 1 Laser Product-
Risk Group 3 (RG3); with other lens (throw ratio less than 2.92), this projector may become Class 1 Laser Product-
Risk Group 2 (RG2) according to IEC 60825-1:2014 and IEC 62471-5: 2015, and also make a variance approvals
under 21 CFR 1010.4 for RG3 LIP according to Classification and Requirements for Laser Illuminated Projectors
(LIPs) (Laser Notice No. 57).
Projection Lens
‡
BX-CAA01
‡
BX-CAA03
‡
BX-CAA06
‡
BX-CTA15
‡
BX-CTA16
‡
BX-CTA17
Projection Lens
‡
BX-CTA13
Laser radiation safety information
To ensure safe operation, read all laser safety precautions before installing and operating the projector.
‡
This projector is class 1 laser product of IEC/EN 60825-1:2014 and risk group 2 with the requirements of IEC
62471-5:2015.
‡
This projector uses extremely high brightness laser. Do not stare directly into the light beam, as the extremely
high brightness may cause permanent eye damage. (Risk Group 2 of IEC 62471-5:2015).
‡
No direct exposure to the beam shall be permitted. (Risk Group 3 of IEC 62471-5:2015).
‡
This product is not for household use.
‡
Possibly hazardous optical radiation emitted from this product.
6
English
Throw Ratio
Classification and Requirements for Laser Illuminated Projectors (LIPs)
‡
0.95-1.22
‡
1.52-2.92
‡
1.22-1.52
‡
HD: N/A
‡
0.75-0.95
‡
0.361(120")
‡
0.65-0.75
Throw Ratio
Classification and Requirements for Laser Illuminated Projectors (LIPs)
‡
2.9-5.5
‡
HD: 2.2 meters
‡
IEC 62471-5: 2015
‡
IEC 60825-1: 2014
‡
CLASS 1 LASER PRODUCT RISK GROUP 2
‡
IEC 62471-5: 2015
‡
IEC 60825-1: 2014
‡
CLASS 1 LASER PRODUCT RISK GROUP 3
Advertisement
Table of Contents
