Table of Contents
Advertisement
SETUP AND INSTALLATION
7.
After the above adjustment of the viewing axis, the projected image from zone A to zone I still cannot
achieve a clear focus on the screen. Please remove the PJ-lens then turn the boresight screws
counterclockwise to the end (STOP), and then turn clockwise 2 circles to the design value position.
3
8.
Repeat steps 2 to 6 above to adjust.
BX-CTA17 Boresight Tool Operating
To mount the ST lens, do the following:
1.
Install the three boresight extenders.
2.
Face the socket heads of the extenders towards the projector.
3
1
2
Boresight hexagon bars
to
1
23
English
Advertisement
Table of Contents
