Display Focus Setting Menu - Optoma OMA-S User Manual

USING THE PROJECTOR
Display menu

Display Focus Setting menu

Auto Focus
Ensure that the projector is positioned at the following specifications:
a. The projector is placed on a flat surface and parallel to the ground.
b. The projected surface is flat and perpendicular to the ground.
Auto Focus
Ensure that the projector is positioned at the following specifications:
a. The projected surface is flat and perpendicular to the ground.
b. The projector is placed at 80-350 cm away from the projected surface.
c. Horizontal and vertical projection angle is within ± 20 - degree range.
Focus
Select "Focus" then pop-up power focus OSD.
‡ Press  and  to manually adjust focus.
‡ Press "ENTER" to execute auto focus.
Auto Focus Adjustment
You can adjust and utilize the auto-focus function if the projected image appears blurry due to being out of focus.
Note:
‡ Ensure that the projector is positioned at the following specifications:
a. The projector is placed on a flat surface and parallel to the ground.
b. The projected surface is flat. The projector, projected surface and ground are perpendicular to each other.
c The projector is placed at 80-150 cm away from the projected surface.
33
English