Table of Contents
Advertisement
PART 1
Switch the main power Off and insert a mouse or wireless mouse dongle into one of the free USB slots.
Switch the main power back On. The device will be automatically recognised and you can start using it.
In the same way you can use a keyboard.* It will make typing of information (web addresses,
searching) much more convenient.
*Not included in the packaging.
3.6 connection of a usb web camera*
If you like to take pictures or talk to other people and watch with video conference apps as Skype
you can connect a USB web camera with an in-built microphone to your Android receiver.
Download and install the latest new video app from the Store first. Then switch the main power Off
and insert the USB webcam connector into one of the free USB slots. Switch the main power back On.
The webcam will be automatically recognised and you can start using it.
*Not included in the packaging.
note:
If you like to change the login name, camera model or if you don't get the webcam running, enter
"Settings – Apps – Skype -- Clear data" first and then login to Skype
new login works.
4.0 fiRsT insTALLATiOn
This procedure will enable you to enjoy and setup your Android receiver just with a few steps. It
is recommended to follow the First Installation step by step. It will guide you through the basic
installation and channel searching process.
Step 1: Language
Step 2: Resolution
Step 3: Screen Size
Step 4: Network
Step 5: Date&Time:
Please check on our web site www.strong.tv for the supported webcam
models.
Select your preferred language for the on screen menu. Use tu to change
language and press OK to confirm your selection.
Select the screen resolution you prefer. Default selection is Automatic, which
already shows the best setting of the connected screen. Press OK to confirm
your selection and the receiver will follow. A banner appears to confirm the
new setting by selecting OK.Confirm again with OK. If you do not see this
banner immediately, wait a couple of seconds and the screen will return to its
previous state. Then try another resolution.
Use pq to adjust the size of the screen so it exactly fits the screen you are
using. Press OK to confirm.
If you have already connected the Ethernet cable to your router, in most
cases the unit finds the correct settings automatically and jumps directly to
Step 5. If you haven't connected a Ethernet cable, but prefer using WLAN,
select WLAN and press OK to open the menu with the available wireless
networks. Use pq to select your network and enter the key or password.
The 0 ~ 9 buttons on the remote control can also be used for entering.
If you have successfully connected to the Internet in Step 4, this screen will
automatically show the date and your local time. If necessary you can select
to test a video call and if the
TM
Fig. 10
,
TM
9
Advertisement
Table of Contents
