Audio; Language; General; Info (About) - Strong SRT 2120 User Manual

Hybrid hd satellite android receiver
Table of Contents

Advertisement

PART 1
(so called 'handshake'). Select Screen adjust if size of displayed screen is bit to large or too small for the
connected screen.

6.4 Audio

In this menu you can setup the correct audio output setting if you like to use Dolby® audio to connect
to a digital amplifier or PCM for analogue amplifier.
Touch sounds:
HDMI audio:
SPDIF audio:
Digital audio:
The selection PCM gives only Stereo to all outputs and the RCA (red/white) connectors gave analogue
audio.

6.5 Language

Select the OSD language which shall be used the menus.

6.6 General

This menu allows you to change the name of your IP receiver, set Auto Standby mode and change
the system password.
6.6.1 name iP box
This menu item allows you to change the name of your Android receiver to what you want it to be
recognized as by IP functions.
6.6.2 Auto standby
Auto Standby helps you reducing power consumption. When set to 30Min/1 Hour/2 Hours up to 6
Hours, the receiver will switch to standby if it doesn't receive any commands during this time. Set
Auto Standby to Off to deactivate the automatic standby function.
Note: Some apps can keep the box awake and overwrite this function.
6.6.3 system Password
For changing the Default PIN code 1234 to another, first enter the currently used PIN and then enter
the new PIN 2x times.

6.7 info (About)

Select this menu to see technical details of the receiver as model name, software version, WLAN MAC
address, Ethernet MAC address, IP address and serial number. You can also find options to upgrade
the software and to restore ALL settings back to Factory default.
Select On to hear every time a click of remote buttons as confirmation. Select
Off for no click sound.
Select On if you connect to a Digital Dolby® amplifier by HDMI cable to
support Dolby® and Dolby® Plus.
Select On if you connect to a Digital Dolby® amplifier with a 3.5 mm mini AV
to 3 RCA cable to support Dolby.
The selection RAW data sends Dolby® audio to outputs depending on above
settings. One of the RCA (red/white) connectors gives digital audio.
15

Advertisement

Table of Contents
loading

Table of Contents