Table of Contents
Advertisement
7.3.3 OsD settings
Info Bar
Transparency
7.3.4 Parental control
Parental Rating
Channel Manager
7.3.5 Data base Management
This menu allows you to make a backup or load a previously made channel list to a USB device.
Insert a USB stick (recommended) into one of the free USB slots.
Backup
Load
note:
7.3.6 Recording settings
This menu allows you to setup settings for Timeshift and recordings to a USB device.
Insert a USB HDD into one of the free USB slots. Alternatively, you can use USB sticks but it must be
high speed and high capacity for recording of HD content.
Storage
Recording Duration
Timeshift
7.3.7 system
This menu allows you to see the currently used software version of the DTV part and restore back to
the factory defaults.
Run on Start-up
Factory Reset
18
Select the duration time for displaying the info bar on screen 5, 10, 15, 20
seconds. Also you can select No timeout to keep the info bar continuously.
Select the level of transparency of menus on top of the live screen.
Select the age rating for which the PIN code shall be entered before watching
a parental rating protected channel. Select All to disable.
The channel manager menu is protected by the PIN code as default to
prevent that your channel list(s) are changed or even deleted by others.
Select Off if you want to disable this function.
Backup the current channel list to a USB device.
Load previously made channel lists. The current one will be overwritten.
You can make more lists as backup and load them later by selecting them
by date(s).
Select the USB device you like to use for the recording function.
The recording time is set to 3 hours as default. For changing this time, select
your default recording time. When you start a recording by pressing 4 you
change this default time to another. The next recording will show this default
time.
Default Timeshift time is set to No limitation. This means that during Timeshift
the data keeps writing to the USB device until you press 3. For limiting the
size of data to prevent that the whole space on your connected USB device is
used you can select your maximum write time.
Select On for starting the DTV immediately after you power ON the box with
main power. Select Off to start in the Android mode.
This function resets your DTV receiver settings back to the default factory
settings. Press OK and enter the PIN code to continue. Select OK to confirm
executing the factory reset. This option will delete all your channels, favourite
lists and settings from the DTV. The receiver will reboot and start with the First
Installation menu of the DTV part.
PART 1
Advertisement
Table of Contents
