Connecting Multiple Fixed Lnbs Using A Diseqc 1.0/1.1 Switch; Connecting To The Internet; Connecting To An Audio Amplifier; Connection Of A Wireless Mouse Or Key Board - Strong SRT 2120 User Manual

b. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the
other end to the HDMI input of your TV.
c. Connect the LAN cable from your router/Internet connection into the RJ45 LAN input.
d. Plug in the power plug from the 12 V adapter and insert the adapter into a suitable wall outlet.
3.2 connecting multiple fixed Lnbs using a Diseqc 1.0/1.1
switch
a. Connect the LNBs of your fixed antenna to the inputs of a DiSEqC 1.0/1.1 switch
b. Connect the output or "to receiver" connector of the DiSEqC 1.0/1.1 switch to the SAT IN
connector on your receiver.

3.3 connecting to the internet

a. For the best performance we advise using a wired connection to your router.
b. Alternatively, you can use the in-built wireless adapter to connect to the Internet via your
wireless router.
note:

3.4 connecting to an Audio Amplifier

Use the included 3.5 mm AV to RCA cable to connect your receiver to the analogue or digital input
of your Hi-Fi system or audio amplifier. Use the white and red RCA for analogue amplifier. For digital
audio use one of these RCA connectors. Only one of them will provide digital audio signal. In the
Android Audio menu you can select the SPDIF audio option to activate digital audio and disable
analogue audio.
Optionally you can use the yellow RCA as analogue low resolution video output. To enable this you
need to remove the HDMI cable and restart the receiver.
note:

3.5 connection of a wireless mouse or key board*

For optimal usage of the Android part we recommend using also a mouse or wireless mouse for
maximum freedom, besides the remote control. This enables tracking and dropping of functions, just
as you can do on mobile phones.
8
Be aware that the Internet speed will be reduced by walls or long distance
between the receiver and the router when using wireless connection. This
will lead to lower quality of video streams from the Internet.
Android is made for high resolution screens and will only be good to watch
and to use on the HDMI output. The yellow RCA video output connector
only supports low quality video.
PART 1
Fig. 8
Fig. 9
Fig. 7
Fig. 10