Clearing Bios Settings (Cmos Memory) - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
7.4

Clearing BIOS Settings (CMOS Memory)

To set the BIOS settings back to the factory default settings (clearing CMOS memory), use the internal jumper
switch.
You can also clear the password set in the BIOS Setup utility (SETUP) by using the similar way.
To clear the password or the CMOS memory, use the corresponding jumper switch illustrated in the figure
below.
CMOS clear jumper
(CMOS_CLR)
Clear
Protection
(Factory Defaults)
44
When the server works, use the BIOS setup utility (SETUP) to return the settings to the
Tips
factory defaults.
Important Do not change any other jumper switch settings. Any change may cause the server
to fail or malfunction.
Express5800/E120e-M Maintenance Guide
7. Resetting and Clearing the Server
Password clear jumper
(PASSWORD_CLR)