Modular Systems - REMEHA Quinta 45 Technical Information

The boiler flow temperature is boosted to the DHW set point + DHW control stop set
point (see Par. 6.6.7 and Par. 6.6.10). When the DHW sensor or thermostat is satisfied
the boiler turns off. The control powers the three way valve from DHW to HTG or turns
off the DHW pump and turns on the system pump (provided there was still a HTG
demand. If no HTG demand, the selected pump will run on for a maximum of 5 minutes).
A Broag high output indirect calorifier can be connected to the Remeha Quinta 45 and
65 in accordance with the schematic sketch shown (see Fig. 11 and 12).
Fig. 11 Remeha Quinta with calorifier and three way valve
04W4HHS00001
Fig. 12 Remeha Quinta with calorifier and DHW pump
04W4HHS00002

7.6 Modular systems

The Quinta series of boilers are idealy suited for modular applications. Kits for up to 5
units are available from Broag. Please see separate leaflet for more details.
55979.indd 42 55979.indd 42
Quinta 45/65
42
Remeha
2-4-2009 9:42:40 2-4-2009 9:42:40