REMEHA Quinta 45 Technical Information page 62

NOTE:
1. Please ensure that the mains power supply is isolated before components are
disconnected from the boiler for maintenance.
2. Care should be taken when stripping the boiler for maintenance making sure that
all parts nuts, washers and gaskets etc. are kept safe, clean and dry.
3. Following cleaning, the boiler should be re-assembled in the reverse order re-
placing gaskets and joints where found necessary.
4. All general cleaning should be carried out with a soft brush or damp cloth to avoid
damaging components. (Solvents must not be used).
5. If parts are found to be badly contaminated please check that the plant room is
kept clean and free of dust etc.
6. Heat exchanger access hatch securing nuts to be tightened using an M6 spanner
of the correct length to a max. torque of app. 7.5 Nm.
55979.indd 62 55979.indd 62
Quinta 45/65
62
Remeha
2-4-2009 9:42:41 2-4-2009 9:42:41