Slave Mode; Settings - SHOWTEC Helix S5000 10 IP65 User Manual

Helix S5000 10° IP65

6.6.5. Slave Mode

In this menu you can set the slave mode of the device.
01) Press the UP/DOWN buttons to select one of the following 2 options:
02) Press the SET button to confirm your choice.
● If you have chosen YES, the device will be set as a slave and will react the same as the master
device.

6.6.6. Settings

In this menu you can adjust the device's settings.
Press the UP/DOWN buttons to select one of the following 12 options:
02) Press the ENTER button to confirm the selection.
Product code: 43724
36