Operation; Safety Instructions For Operation; Control Modes - SHOWTEC Helix S5000 10 IP65 User Manual

Helix S5000 10° IP65
6.

Operation

6.1.

Safety Instructions for Operation

Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an outdoor spot. It is not suitable for households and for
general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.
6.2.

Control Modes

The Helix S5000 10° IP65 can be operated with a DMX controller, or without a DMX controller as a stand-
alone device or in a master/slave setup.
The Helix S5000 10° IP65 supports the following control modes:
● Stand-alone:
● Master/Slave:
● DMX-512:
● Wireless DMX / CRMX:
For more information about how to connect the devices, refer to 5. Setup on pages 22–27.
To operate the device manually as a stand-alone device or in a master/slave setup:
Adjust the intensity values for the colors. See 6.6.2. Manual Mode on page 34 for more information.
In auto operation mode you can run the auto program:
Select the auto program. See 6.6.3. Auto Mode on page 34 for more information.
In Program Mode 01 you can select one of 38 static colors. To run this program:
01) Select Program Mode 01 in the Program menu.
02) Select one of the 38 static colors. See 6.6.4.1. Program 01 / Static colors on page 35 for more
information.
03) Add strobe effect. See 6.6.4.1. Program 01 / Static colors on page 35 for more information.
In Program Mode 02–26 you can select one of the built-in programs. To run one of the built-in programs:
01) Select Program Mode 02–26 in the Program menu.
Select one of the 15 built-in chases. See 6.6.4.2. Program 02–26 on page 35 for more information.
03) Add strobe effect or adjust the chase speed. See 6.6.4.2. Program 02–26 on page 35 for more
information.
Product code: 43724
Manual operation mode, auto operation mode (auto programs), built-in
programs
Manual operation mode, auto operation mode (auto programs), built-in
programs
5 channel modes (4, 6, 8, 20 and 24 channels)
5 channel modes (4, 6, 8, 20 and 24 channels)
28