Angle Adjustment - SHOWTEC Helix S5000 10 IP65 User Manual

Helix S5000 10° IP65

4.7.1. Angle Adjustment

You can adjust the angle of the device with the 2 adjustment screws (08).
01) Turn the adjustment screws (08) counterclockwise to release them.
02) Tilt the device at the desired angle (see Fig. 13).
03) Turn the adjustment screws (08) clockwise to tighten them. Make sure that the device cannot move
freely after the adjustment screws (08) are tightened.
Fig. 13
Product code: 43724
20