Programs 02-16; Master/Slave Mode - SHOWTEC Cameleon Spot 7 Q6 V1 User Manual

Cameleon Spot 7 Q6
Program 01
01) If you select program 01, the display shows:
Touch the UP/DOWN buttons to select one of the 2 options:
● COLOR
● STROBE
Touch the SET button to enter the desired menu.
If you select COLOR, touch the UP/DOWN buttons to select one of the 33 color macros. Touch the SET
button to save your settings.
If you select STROBE, touch the UP/DOWN buttons to set the strobe frequency. The adjustment range
is between 0–99, from OFF to high frequency. Touch the SET button to save your settings.
Programs 02–16
01) If you select one of the programs 02–16, the display shows:
02) Touch the UP/DOWN buttons to select one of the 2 options:
● SPEED
● STROBE
03) Touch the SET button to enter the desired menu.
04) If you select SPEED, touch the UP/DOWN buttons to set the built-in program's speed. The adjustment
range is 1–100, from slow to fast. Touch the SET button to save your settings.
05) If you select STROBE, touch the UP/DOWN buttons to set the strobe frequency. The adjustment range
is 0–99, from OFF to high frequency. Touch the SET button to save your settings.

Master/Slave Mode

In this menu you can set the device as a slave.
01) While in the main menu, touch the UP/DOWN buttons to select SLAVE.
02) Touch the SET button to enter the menu. The display shows:
03) Touch the UP/DOWN buttons to select YES or NO.
04) Touch the SET button to confirm.
05) If you select YES, the device will be set as a slave and reacts the same as the master device.
Product code: 42665
27