Table of Contents
Advertisement
Helix S5000 10° IP65
4.4.
Installing the Beamshapers (43727/43728/43729)
You can attach a beamshaper to the device.
To install the beamshaper to the device:
01) Put the beamshaper on the lens of the device. The beamshaper is equipped with multiple magnets
which keep it firmly in position. For extra safety, use a safety cable to connect the beamshaper to
the device.
02) To remove the beamshaper, pull it by the handles located on its sides.
43727
– Beamshaper for Helix S5000 Q4 (20°)
43728
– Beamshaper for Helix S5000 Q4 (40°)
43729
– Beamshaper for Helix S5000 Q4 (15°x60°)
Product code: 43724
14
Fig. 05
Advertisement
Table of Contents
