Spectral PC 1800Z IP
2. DMX Address
With this menu you can set the device's DMX starting address.
01) While in the main menu, press the UP/DOWN buttons to choose ADDRESS.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between 001-
512.
04) Press the ENTER button to save changes.
3. Built-in programs
With this menu, you can set the built-in programs.
01) While in the main menu, press the UP/DOWN buttons to choose AUTO.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose one of the 10 uneditable built-in programs (AUTO1-AUTO10)
and 10 presets (PROGRAM1-PROGRAM10) which can be edited in Edit mode (see page 17).
04) Press the ENTER button to select the desired built-in program.
05) If you have chosen one of the programs (AUTO1-AUTO10), press the ENTER button to proceed to the
program speed settings.
06) Press the UP/DOWN buttons to set the program speed. The adjustment range is between 0-255, from
slow to fast.
07) The device will now run the desired built-in program.
4. Master/Slave Mode
With this menu, you can set the device as a slave.
01) While in the main menu, press the UP/DOWN buttons to choose RUN MODE.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options: DMX and SLAVE.
04) If you have chosen DMX, the display is operating in DMX/Master Mode.
05) If you have chosen SLAVE, the device is operating in Slave Mode. It means that it will react the same
as the master device.
5. Zoom Mode
With this menu, you can set the zoom mode.
01) While in the main menu, press the UP/DOWN buttons to choose ZOOM MODE.
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options: ZOOM 1 and ZOOM2.
Ordercode: 43553
16